1. The length required for quality LED double batten light should be good in advance, and should be rounded off. If it is 4.4 meters, it must be 5 meters, why? Because the quality LED double batten light is a unit of 1m, it will not affect the circuit only if it is cut off from the notch. If it is cut at random, it will cause a unit not to light up.
2. The quality LED double batten light interface plug cannot be reversed
The quality LED double batten light is not an LED diode, it is driven by DC, so there are positive and negative poles. If the positive and negative poles are reversed, the quality LED double batten light will not light up. . If the connection plug does not turn on, just disassemble the other end of the quality LED double batten light.
3. Correct placement of quality LED double batten light
Most of the quality LED double batten light is in the original packaging of the coil. The newly disassembled quality LED double batten light will be twisted and difficult to install. It can be smoothed first and placed in the lamp slot.
Since the quality LED double batten light is single-sided, if it is not placed flat, there will be uneven light and shade, especially at the corners.
4. Pay attention to the installation environment
Most of the quality LED double batten light is installed in the groove around the ceiling, and the dust in the groove must be cleaned, because the dust can easily cause an open fire accident when heated.
